Category: what’s new

The 2025 edition of the Practical Components catalogue is now available for download. A dummy component is the exact mechanical equivalent of a live component used when only the physical properties of the components are required. These components can cost as much as 80% less than live components, making them ideal for testing of solder […]

We have added Coventry Econowipes to our product range, to complement our other cleaning wipes and swabs. The Coventry brand is highly respected in industrial and precision cleaning sectors for delivering exceptional quality and performance in critical cleaning applications. They are renowned for cleanroom wipes that are engineered for extremely sensitive applications, including: Electronics manufacturing […]

We have agreed a new distribution agreement with medmix, the leading system provider in mixing, dosing, and adhesives application for industrial applications, for its MIXPAC™ product range. Intertronics are now able to supply a wide variety of mixers, cartridges, and dispensers to our UK customers, serving multiple sectors, from electronics to construction. The new partnership […]

The THINKY ARE-312 is an industrial planetary mixer that can mix, defoam, and degas liquids, powders, and pastes in seconds to minutes to produce a uniform, homogenous mix. It is the upgrade to our very successful and popular flagship ARE-250, introducing several advancements, including computer connectivity with data logging, an improved user interface, and a […]

Our partners SCIGRIP have announced the new SG400LSE MMA Methyl Methacrylate Adhesive for Low Surface Energy Plastics that creates fast and strong bonds with low surface energy plastics. SG400LSE has been tested on high-density polyethylene (HDPE), ultrahigh molecular weight (UHMW) PE, and homopolymer, copolymer and glass-filled polypropylene (PP) – bond strength testing results in substrate […]

Eight years ago, I wrote about this quote from Arthur C. Clarke: “Any sufficiently advanced technology is indistinguishable from magic.” That quote is still on the wall of our Technology Centre, even though we have moved into a bigger facility since I wrote the blog post. Then, I discussed how we demystify advanced adhesive technologies […]

Designed specifically for small volume fluid or liquid dispensing applications, the eco-PEN XS 180 doses highly precise quantities of various materials in the nanolitre and microlitre ranges. The eco-PEN XS 180 is suitable for both line and dot dispensing, with bead widths starting from >0.1 mm, and an adjustable dispensing rate to suit the run […]

The upcoming REACH training and certification requirements for users of diisocyanates are looming ever closer, impacting your use of many polyurethane adhesives in industrial applications. If you haven’t heard about this, read more here. Point-One Structural Polyurethane Adhesives are fast-curing two-part adhesives that form strong, durable bonds in as little as 10 minutes. They are […]

Cyanoacrylate adhesives typically perform poorly in high humidity or wet conditions, but there are exceptions to this rule. If your finished product will be exposed to a moist environment, we recommend trying Born2Bond Aquafast cyanoacrylate adhesive. It offers the standard benefits of cyanoacrylates – quick cure speed, adhesion to a broad variety of substrates, and […]

The most hard-to-bond substrates and awkward areas are now treatable with low temperature, plasma surface treatment. Two new modules, released by Relyon Plasma for their popular PiezoBrush PZ3 and PiezoBrush PZ3-i plasma systems, expand the applications which can benefit from activating, functionalising, and cleaning to increase wetting and improve adhesion.   Needle Nozzle Cleaning and […]

Dymax MD® 1040-M is a new, versatile autoclave resistant medical device adhesive, coating, and encapsulant. Resistant to numerous cycles of sterilisation, Dymax 1040-M is suitable for consideration in a range of medical devices and surgical tools. This light curable material cures in seconds on exposure to UV light, and contains no solvents, to deliver a […]

Honing in on your optimal dispensing process often comes down to a degree of trial and error – even experienced operators sometimes choose the wrong tip at first. Material rheology and dispensing behaviour can be surprising. To help you evaluate and establish your dispensing process, we have released the DCK800X dispensing component kit. Containing over […]

Dymax 9771 Dual-Cure Light and Moisture-Cure Conformal Coating is now available. This low outgassing material is the first conformal coating that meets ASTM E595 and MIL-STD 883 and is therefore suitable for the aerospace and defence markets in applications including missile, satellite, and space critical printed circuit board assemblies. This coating has UL 94 V-0 […]

IRS 3078 Polyurethane Potting Compound is a semi-rigid, room temperature curing and electrically insulating black polyurethane potting compound. The material, which is low viscosity, semi-thixotropic and flowable, is available in convenient side-by-side double syringe cartridges. This packaging suits customers with smaller volume or occasional production needs. It offers high adhesion, good electrical insulation properties and […]

We have introduced IRS 2128 Toughened Epoxy Adhesive. This structural adhesive is a high-performance black resin system that offers good chemical resistance and excellent adhesion to a wide variety of substrates. Compared with many other epoxies, it offers vibration resistance and can bond dissimilar substrates more effectively. A two-part system with a simple 1:2 mix […]

We have introduced Dymax Low Shrink™ OP-81-LS UV adhesive, which offers very low volumetric shrinkage. Designed for optical assembly applications that require precise alignment, the material cures in seconds on exposure to UV/visible light. It is single-part, solvent free and can bond dissimilar substrates — it is recommended for materials including polycarbonate, glass, acrylic, metal, […]

Our customers sometimes want to take advantage of UV curing on large or complicated assemblies, where a bench-mounted UV curing lamp will not allow ready access to the target areas. Some examples which spring to mind are the bonding of large PMMA point-of-sale assemblies, or the temporary masking of turbine blades. You also want to […]

If you are mixing ultra-critical applications where even micro-bubbles cannot be tolerated, you may need the latest industrial non-contact vacuum planetary mixer, the THINKY ARV-501CE. The unit has a maximum capacity of 700g for mixing, de-foaming and degassing  any combination of liquids, powders, and pastes. It is suitable for all engineering compounds, from low viscosity to […]

Dymax MD® 1172-M-UR is an LED UV and broad-spectrum light-curable adhesive for bonding COC/COP film laminates and other difficult-to-bond-to plastics used in the assembly of in-vitro diagnostics (IVD), Lab-on-a-chip (LOC), and other point-of-care medical devices. This adhesive may also be of interest to manufacturers involved with the design of COVID-19 rapid diagnostic applications. The adhesive […]

The mixing and dispensing of two-part potting compounds, encapsulants and similar products has to be one of the trickiest production processes to get under control. If you are looking to scale up or streamline your existing process, we are now able to offer the 2-K-DOS Metering, Mixing and Dispensing System. It is based on gear […]

Wacker’s SILPURAN 4200® medical-grade silicone adhesive is a single-part transparent, room temperature vulcanising (RTV) silicone adhesive that is suitable for bonding cured silicone parts and highly elastic bonding between silicone and textiles, such as in ventilation masks and respiratory bellows. Formulated with a new catalyst which does not use organotin compounds, SILPURAN 4200 is ISO […]

Cyanoacrylate adhesives (CAs) cure best interfacially, i.e. between two surfaces, and in thin bondlines. In adhesive joint formats where there are exposed CA surfaces, fillets, or normal squeeze-out, those parts can take a long time to cure. This may inhibit the flow of a product to the next process in production, or attract contamination when […]

We’re on a mission to help UK manufacturers squeeze more productivity out of their bonding and materials application processes. While it is not usually difficult to figure out the investment justification on the equipment that we offer, there also isn’t a high upfront cost for improving your dispensing process from a manual one to one […]

Cyanoacrylate adhesives (CAs) have been around since the 1950s, and from the 1970s they have become a common household product. Today, manufacturers are increasingly using CAs and rely on them to bond plastics, metal, ceramic, rubber, wood and other substrates in many types of assemblies. They are unique in that they provide fast curing and […]

We have a long and successful history of selling THINKY mixers for mixing and/or degassing of materials including pastes, liquids, powders, inks, and very high viscosity materials. Our experience, and that of our customers, is that they do a superb job of quickly mixing these media to a homogeneous, bubble-free compound with consistent results every […]

When aesthetics are an important consideration alongside reliable sealing performance, a clear silicone is worth considering. Wacker ELASTOSIL® N2199 is a highly flexible, translucent silicone which meets the criteria of MIL-SPEC 46146, Group I, Type I. N 2199 is a one-part, ready-to-use, acid- and sovent-free, RTV-1 nonslumping paste that cures at room temperature to a […]

Dymax SpeedMask® 7601 is a high-performance, LED-curable, peelable masking compound formulated for surface protection during plating, anodizing (Type II or III), grit blasting and acid stripping (hydrochloric, nitric and sulfuric solutions) processes. SpeedMask temporary masking compounds are single-part liquids which are readily applied to parts prior to surface treatments. They cure very quickly with UV […]

Our partner, VERMES Microdispensing, a world leader in the design and manufacture of innovative microdispensing concepts and systems, has introduced DST – Dynamic Shockwave Technology. Applied to jetting valve technology for the application of fluids and pastes, DST is an enabling move forward. Dynamic Shockwave Technology stands for a revolutionary actuator principle. Through optimised channel […]

The modular connectivity design of the new F4000 ADVANCE series of benchtop dispensing robots from Fisnar gives manufacturers more control in specifying an automated fluid dispensing system that will meet their own particular requirements. The ADVANCE series comprises the most extensive range of 3-axis, 4-axis and 5-axis robots in the industry and allows a simple […]

Many two-part adhesive materials are supplied in side-by-side cartridges, particularly in 50ml quantities. If you are using a material packaged in 50ml cartridges, the most likely associated dispensing method is a simple, manual dispensing gun. Manual dispensing guns are convenient and inexpensive. This is ideal if you are sampling a material or using it in […]

A rotary dispensing table is a simple robot which holds a round or cylindrical object, rotating it while a material is applied to it via a dispensing syringe, pump or valve. Whilst it is a simple tool, it will provide consistent results, reducing manual labour, rejects, and wasted material. When dispensing onto round objects or […]

WACKER SilGel 612 silicone gel potting compound has a cured consistency that is really hard to describe in words, so we have demonstrated it in video format. This soft silicone gel provides excellent shock and vibration absorption in addition to the usual benefits of potting compounds such as component protection from water and other environmental […]

Bringing portability, precision and power to UV curing To improve UV curing options available for the medical, industrial, electronics, automotive and optical industries, we have launched the IUV101 LED UV Spot Lamp for Handheld UV Light Curing.  The new 370nm handheld spot lamp offers up to 2,000 mW/cm2 intensity in a cost-effective and portable package. It […]

WACKER ELASTOSIL® N9111 is a tin-free single part RTV silicone sealant, with a neutral cure chemistry, producing a non-corrosive seal that does not inhibit other materials such as platinum cure silicones. This, along with its flame retardancy (it meets UL94 V-0), makes it a strong candidate for electronics manufacturing, especially for gap filling, component ruggedisation, […]

In time/pressure fluid dispensing, the use of a dispensing piston in the syringe barrel can benefit in a number of ways: a piston helps to apply even pressure across the liquid surface, giving a more uniform dispense, it acts as a barrier between the liquid and the air, and it reduces waste and residue in […]

The latest dispensing product from us is the Fisnar F4500N Benchtop Dispensing Robot which shares all the technical advantages of the F4000 range in an expanded format of 500x500mm, still in a convenient benchtop design. The Fisnar F4500N is a full function robot that enables cost effective automation of liquid dispensing operations, allowing increased productivity […]

The preeflow® eco-PEN330 Volumetric Dosing Pump is now available, joining a range of very successful sibling preeflow eco-PENs. It offers manufacturers precision application of fluids and pastes from a minimum of 0.002ml, at rates of up to 3.3 ml/min. The preeflow progressive cavity pump technology handles delicate fluids from watery up to a pasty consistency without damage, and […]